Cost Comparison Of A Cast-In-Place Chimney Liner

Share on facebook
Share on linkedin
Share on twitter
Share on whatsapp
Share on email

Author – Golden Flue

When contemplating the repair of a chimney, there are, unfortunately, many considerations which do not become apparent until after the work has been completed and the contractor is long gone. This frequently occurs as the result of misleading or misinformed analysis of the damaged chimney. It is all too true that when repairs are being discussed, one concern, regretfully, attracts more attention than others: price.

The question that is often overlook and only considered after the job is completed and the contractor departed is the fitness of the repair to work properly with the original appliance such as a fireplace or furnace. The time to ask questions about the fitness of the repair is before work begins.

Unfortunately, many repairs reduce the diameter of the flue so that the original appliance no longer vents properly. When this happens, the fireplace, for example, will not vent properly and the smoke will come back into the home. At this point, the cost of the repair is no longer a factor. It is at this point that the bitter taste of poor quality remains long after the sweet joy of low price is forgotten.

This decrease in flue diameter size happens with regularity when a stainless steel liner, for example, is improperly installed for the original appliance. Remember, when a stainless steel sleve is inserted into an existing liner, the diameter of the flue is instantly decreased. Is this a real fix to the problem or just a cover-up? This is what happens when price is the primary concern.

To make matters worse, when a chimney liner is installed, it is required by Underwriters Laboratory (UL) to be insulated on the outside of the liner. The National Fire Protection Association standard 211 (NFPA 211) also requires all liners to be insulated around the outside. Firstly, insulating the liner prevents heat transfer – the number one cause of structural fires – to the outer walls of the chimney. Additionally, insulating the liner contains the flue temperature within the liner thus producing a hotter flue temperature which naturally increases the draft of the venting system.

It is a sad fact that most steel liners that we have seen installed have had no insulation. This will leave both the homeowner and the insurance company with a false sense of security. Oh, insulating half-way around the liner is not the answer!

You are only as safe as the weak points of the system!

~ Golden Flue

To read more like the article above, click on the topic below...

Leave a Comment

Your email address will not be published. Required fields are marked *

For security, use of Google's reCAPTCHA service is required which is subject to the Google Privacy Policy and Terms of Use.

I agree to these terms.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Scroll to Top